Signed in as:
filler@godaddy.com
SITE PREP CHECKLIST
- Make sure the ground is level, this is essential if you want to get your building certified. The newly built structure cannot be more than 3 inches off level from either front/back or left/right. If the site isn’t level during the installation, our experts will level the site at an additional fee. Ensure that you have cleared the area of debris, machinery or tools so installation team can access the site. If not, the installation team may have to come back again later, which would mean time delay and more expenses for you in your carport installation. In case the area isn’t leveled when our team arrives for installation, if possible, they may offer to level the site for you. However, this will cost you an extra fee.
- Carports can be installed on soil foundation, however, if you’re choosing the soil as the foundation, you must prepare the site by removing any kind of vegetation, grass or debris.
- Level the area. For this, you can either use a commercial tamper or drive over the area multiple times to make the loose soil pounded and compact. You can also use a concrete roller to get the job done easily.
- Once the ground is ready, keep the area clear so our experts can come in with heavy equipment and get the job done at as quickly as possible.
- If you wish to use a concrete pad as the permanent foundation, you must have the area completely ready; concrete fully cured and settled, before our experts can start installing the structure.
- Make sure that the concrete pad meets the guidelines made by local authority, and get it checked beforehand by an expert so there aren’t any issues during installation or the certification process.
- Your carport installation site should be accessible. Most Install Team will arrive in a Large Pick-Up Truck with a 30'-40' Trailer. (Sharp Turns, Steep Hills, or limited Space can cause issues)
30 WIDE X 60 BASE X 16 TALL
WHAT TYPLE OF ROOF STYLES DO YOU OFFER?
STANDARD STYLE
A-FRAME HORIZONTAL
A-FRAME HORIZONTAL
Rounded corners, horizontal roof panels. The “basic” of carport designs. Typically, the most economical and affordable product.
Recommended up to 31' Long On
A-FRAME HORIZONTAL
A-FRAME HORIZONTAL
A-FRAME HORIZONTAL
“A” frame, horizontal roof panels. An upgrade from Regular style that is both stylish and affordable.
Recommended up to 31' Long Only
A-FRAME VERTICAL
A-FRAME HORIZONTAL
A-FRAME VERTICAL
“A” Frame, Vertical roof panels. Prevents rain and snow from “standing” on your building. Additional Steel Purlins for Roof Panel Support
WE OFFER THE LARGEST SELECTION OF COLORS IN THE INDUSTRY!
EXPERIENCE THE UNIQUE STYLES OF STEEL BUILDINGS.
MIX & MATCH COLORS FOR YOUR ROOF, SIDES, ENDS, AND TRIM
But wait! There's another option, Wainscott Siding.
This is another inexpensive option. Wainscot is a design element which provides for side panels of one color ascending the wall at 36″ height where it meets with a contrasting upper wall color. Think of a colonial style wall with darker color panels on the bottom portion of the wall and a lighter color on the walls above. The same concept can easily be applied to the end walls of your steel building.
HOW TO PICK THE RIGHT SIZE
The dimensions of the unit (width, length and height) are based on your need and what the planned use or function of the unit is going to be. The side height is measured on the side wall and not at the center or apex of the unit. You will want to ensure that the unit’s side height is tall enough for your car, truck, camper or RV. Should you ever plan to enclose the unit, add enough space for garage door height and clearance. If you are unsure about any of the dimensions, call us and one of our experienced team members can assist you in selecting the right one for your needs.
desing criteria in your area
The weather in your area determines what kind of carport you would need. When purchasing a Carport, it is important to consider the wind load certification to ensure that the structure can withstand high winds, especially if the building is located in an area known for inclement weather. Note: Consult your local building department for your specific Snow Load requirements.
Any other criteria/requirements such as “extra snow load baring weight and wind load resistance” can be met with engineering certification “upon customer’s request.” Customized steel structures are always welcomed.
additional add ons for your unit
ROLL UPS
man doors
ROLL UPS
SIDE CLEARANCE AND OVERHEAD CLEARANCE REQUIRED
windows
man doors
ROLL UPS
CAN BE PLACED WITHIN THE STRUCTURAL UPRIGHTS. IF NOT, ADDITIONAL FEES WILL APPLY
man doors
man doors
man doors
CAN BE PLACED WITHIN THE STRUCTURAL UPRIGHTS. IF NOT, ADDITIONAL FEES WILL APPLY
insulation
man doors
man doors
DOUBLE SIDED FOIL INSULATION